Author Topic: V8 beta  (Read 69521 times)

Offline Kitty Hello

  • code monkey
  • Administrator
  • Prof. Inline
  • *******
  • Posts: 10803
  • here on my island the sea says 'hello'
    • View Profile
    • http://www.glbasic.com
Re: V8 beta
« Reply #90 on: 2010-Jul-12 »
Hark0: Try to completely remove the XCode directory, then rebuild for iPad.

MrTAToad

  • Guest
Re: V8 beta
« Reply #91 on: 2010-Jul-12 »
The program loads a sprite, gets its size, calls SPR2MEM, writes the data to file, deletes the sprite and then proceeds to the next file.

Add a SLEEP in between. I have the impression that your virus program is blocking files when quickly trying to access them... You had that problem with the GCC/GPC, too.
Alas, its not the AV this time as I disabled it...

Offline Kitty Hello

  • code monkey
  • Administrator
  • Prof. Inline
  • *******
  • Posts: 10803
  • here on my island the sea says 'hello'
    • View Profile
    • http://www.glbasic.com
Re: V8 beta
« Reply #92 on: 2010-Jul-12 »
OK, Send me some sample code then.

The Type-not-declared problem seems a bigger one. I should have not touched this.
I will have to rewrite a big portion of my source code to deal with all this.

MrTAToad

  • Guest
Re: V8 beta
« Reply #93 on: 2010-Jul-12 »
Unfortunately it needs to be done, otherwise extended TYPE use will be limited...  :good:

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #94 on: 2010-Jul-12 »
Hark0: Try to completely remove the XCode directory, then rebuild for iPad.

My steps are correct? I delete Xcode ALLWAYS before compile...

"Simple" sets app to resolution for ipad and go?

And on Xcode I compile for target family ipad... iphone or ipad/iphone?

See my steps at: http://www.glbasic.com/forum/index.php?topic=4604.msg35501#msg35501

 O_O


EDIT: Downloading & installing 8.036. Testing for iPad.  :)

EDIT2:

Nothing, it does not work  :rant:  :'(

Call me silly but I'm not able to compile for IPAD. I have no problem on iphone, but IPAD does not work.

I am using the latest SDK from Apple and the latest beta version GLBasic (036).

Someone can get a step by step guide for donkeys?  :blink:

Thanks in advance.
« Last Edit: 2010-Jul-13 by Hark0 »
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline dijster

  • Mc. Print
  • *
  • Posts: 23
    • View Profile
Re: V8 beta
« Reply #95 on: 2010-Jul-13 »
I'm not at my mac at the moment, so I can't tell you exactly what you need to do, but.

In the Xcode project, open up the Targets (in the Groups & Files section)

In the list you get, scroll down and you will see something that says target device (not 100% sure), change this to iPad and you should be good to go.

[attachment deleted by admin]

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #96 on: 2010-Jul-13 »
I'm not at my mac at the moment, so I can't tell you exactly what you need to do, but.

In the Xcode project, open up the Targets (in the Groups & Files section)

In the list you get, scroll down and you will see something that says target device (not 100% sure), change this to iPad and you should be good to go.

Changed to ipad, iphone and iphone/ipad too....

Nothing!!!!!!!  :(

Upgrade to ipad ENABLED¿?¿?¿?¿¿?

Testing....

EDIT: Tested and....NO WORK FOR ME!!!  zoom icon in - zoom icon out and app exits

 :noggin:
« Last Edit: 2010-Jul-13 by Hark0 »
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline dijster

  • Mc. Print
  • *
  • Posts: 23
    • View Profile
Re: V8 beta
« Reply #97 on: 2010-Jul-13 »
Strange, sounds like your app might be crashing.
Try creating a new GL project and just enter this code
Code: (glbasic) [Select]
SETSCREEN 1024,768,0
WHILE TRUE
DRAWRECT 100,100,824,568,RGB(255,0,0)
SHOWSCREEN
WEND

Compile it for the iPad and it should just show a red rectangle.

If this works, then there may be a problem in your code, if this doesn't, then there may be a problem with xcode.

Hope this helps

Offline matchy

  • Prof. Inline
  • *****
  • Posts: 1545
    • View Profile
Re: V8 beta
« Reply #98 on: 2010-Jul-13 »
 :S
Hark0, as you have mentioned by your post that your code has graphics. Post your code so we can help you! Does my code work? If you can compile for iPhone, then it's virtually the same for iPad. Just make sure you compile at 768x1024 (or 1024x768) by setting it in the Project/Options and not with SETSCREEN.
« Last Edit: 2010-Jul-13 by matchy »

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #99 on: 2010-Jul-13 »
Strange, sounds like your app might be crashing.
Try creating a new GL project and just enter this code
Code: (glbasic) [Select]
SETSCREEN 1024,768,0
WHILE TRUE
DRAWRECT 100,100,824,568,RGB(255,0,0)
SHOWSCREEN
WEND

Compile it for the iPad and it should just show a red rectangle.

If this works, then there may be a problem in your code, if this doesn't, then there may be a problem with xcode.

Hope this helps

Can you tell-me step by step the XCODE procedure?

I have a folder from GLB named Xcode...

HOW At this point I continue... setup xcode, set target, etc... maybe there are my error....

TIA, Hark0
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #100 on: 2010-Jul-13 »
:S
Hark0, as you have mentioned by your post that your code has graphics. Post your code so we can help you! Does my code work? If you can compile for iPhone, then it's virtually the same for iPad. Just make sure you compile at 768x1024 (or 1024x768) by setting it in the Project/Options and not with SETSCREEN.

My code occupies 18 DIN A-4 pages...  =D

I tried with this:

Code: (glbasic) [Select]
WHILE TRUE
FOR n=0 TO 768 STEP 5
DRAWLINE 0,0,n,1024,RGB(255,255,255)
DRAWLINE 768,1024,n,0,RGB(255,255,255)
NEXT

SHOWSCREEN
WEND
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #101 on: 2010-Jul-13 »
Strange, sounds like your app might be crashing.
Try creating a new GL project and just enter this code
Code: (glbasic) [Select]
SETSCREEN 1024,768,0
WHILE TRUE
DRAWRECT 100,100,824,568,RGB(255,0,0)
SHOWSCREEN
WEND

Compile it for the iPad and it should just show a red rectangle.

If this works, then there may be a problem in your code, if this doesn't, then there may be a problem with xcode.

Hope this helps

testing setscreen

AND..... NOT WORK!  :'( :'( :'( :'( :'(
« Last Edit: 2010-Jul-13 by Hark0 »
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #102 on: 2010-Jul-13 »
My procedure:

- Write SRC on GLB 8.036. (simple "hello world test").
- Test and works on win32
- Set Res for iphone at 768x1024 (or 1024x768).
- Compiling multiplatform for iphone.
- Modify Bundle field for sing app.
- Modify *.pch (empty file).

- Set project to RELEASE device.
- Set to 3.2 device.

- Tried for ipad, tried universal....

Nothing!!!!  :blink: :blink: :blink: :blink: :blink:

EDIT: Triing to compile xcode source without GLB... for testing ipad deployment etc etc etc

EDIT2: I created a NEW Xcode project (without GLB) ALL Xcode... simple "utility application" sample with rotated info panel.... compiled and works 100% on ipad.... The problem is on GLB ¿?¿?¿?¿?¿?¿?
« Last Edit: 2010-Jul-13 by Hark0 »
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic

Offline matchy

  • Prof. Inline
  • *****
  • Posts: 1545
    • View Profile
Re: V8 beta
« Reply #103 on: 2010-Jul-13 »
My code occupies 18 DIN A-4 pages...  =D

I don't mean your full code, just your test code like "PRINT "HELLO iPad",10,10;SHOWSCREEN;MOUSEWAIT".

Anyhow, this is what I do for iPad only:

0. Plug in and sync the iPad to the Mac.
1. Open the XCode project (that's created by GLB)
2. Select "Release" in the project.
3. From the menu Project/Edit Active Target "appname".
4. Set Base SDK to iPhone 3.2.
5. Set Targeted Device Family]/b] to iPad.
5. Set iPhone OS Deployment Target to iPhone OS 3.2
6. Set the Code Signing Identity (if need be).
7. Hit "Build & Run".
 :good:

I just tried that and work fine!!!!


Offline Hark0

  • Prof. Inline
  • *****
  • Posts: 1020
  • Geek Developer
    • View Profile
    • LitioPixel - Desarrollo de videojuegos con GLBasic | Videogame development with GLBasic
Re: V8 beta
« Reply #104 on: 2010-Jul-13 »

I don't mean your full code, just your test code like "PRINT "HELLO iPad",10,10;SHOWSCREEN;MOUSEWAIT".

Anyhow, this is what I do for iPad only:

0. Plug in and sync the iPad to the Mac.
1. Open the XCode project (that's created by GLB)
2. Select "Release" in the project.
3. From the menu Project/Edit Active Target "appname".
4. Set Base SDK to iPhone 3.2.
5. Set Targeted Device Family]/b] to iPad.
5. Set iPhone OS Deployment Target to iPhone OS 3.2
6. Set the Code Signing Identity (if need be).
7. Hit "Build & Run".
 :good:

I just tried that and work fine!!!!

YES!!! YES!!! YES!!! YES!!! Thanks matchy!!!

WORKING PERFECT!!!!!   :good: :good: :good:

(I missing "second" step 5 -Set iPhone OS Deployment Target to iPhone OS 3.2-)  :P

THANKS TO ALL!!!!

« Last Edit: 2010-Jul-13 by Hark0 »
http://litiopixel.blogspot.com
litiopixel.blogspot.com - Desarrollo videojuegos Indie · Pixel-Art · Retroinformática · Electrónica Development Indie Videogames · Pixel-Art · Retrocomputing · Electronic