Author Topic: Drawing with DEPTH  (Read 3142 times)

Offline Dark Schneider

  • Mr. Polyvector
  • ***
  • Posts: 128
    • View Profile
Drawing with DEPTH
« on: 2010-Jun-28 »
Yes, depth for 2D drawing, the idea is for save fill-rate. Enable the depth buffer for 2D so we can draw 1-bit alpha graphics in front-to-back order and save much fill-rate.

2D functions could have a new 'depth%' param (0 used if not indicated) with 256 levels (0-255 values), 0 is total front and 255 is total back. Or use instead the same depth configured with a previous X_MAKE3D.

Using a default value of 0 like with vertex color in POLYVECTORs RGB(255,255,255) with no need to pass a value there is no need to re-write old codes.

Offline S. P. Gardebiter

  • Mr. Polyvector
  • ***
  • Posts: 247
    • View Profile
    • Tile 44 Interactive
Re: Drawing with DEPTH
« Reply #1 on: 2010-Jul-09 »
Well, there is a way you could do that with code too o:
But with real depth it would be easier for some things, yes.
~ Cave Story rules! ~