### Author Topic: Moving between two sets of coordinates  (Read 7490 times)

• Guest
##### Moving between two sets of coordinates
« on: 2009-Jan-21 »
This code allows you to calculate the X/Y step values between two sets of coordinates, allowing you to move between the two.

Code: GLBasic [Select]
// --------------------------------- //
// Project: TestLineMove
// Start: Monday, January 19, 2009
// IDE Version: 6.138

TYPE tMoveAlongLine
ax
ay
ex
ey
bx
by
ix
iy
numSteps
maxDistance
ENDTYPE

FUNCTION _dummy:
ENDFUNCTION

INLINE
#include "math.h"
extern double atan2 (      double y,      double x );
ENDINLINE

FUNCTION setTo:x,y
moveAlongLine.ax=x
moveAlongLine.ay=y
ENDFUNCTION

FUNCTION changeTo:bx,by
moveTo(moveAlongLine.ax,moveAlongLine.ay,bx,by)
ENDFUNCTION

FUNCTION angleBetweenPoints:ax,ay,ex,ey
INLINE
double angle;

angle=atan2(ex-ax,ey-ay);
if (angle<0.0)
{
angle=180.0+(180.0+angle);
}

return angle;
ENDINLINE
ENDFUNCTION

FUNCTION moveTo:sx,sy,fx,fy,mDistance=-1.0
LOCAL dx
LOCAL dy

moveAlongLine.ax=sx
moveAlongLine.ay=sy
moveAlongLine.ex=fx
moveAlongLine.ey=dy

dx=fx-sx
dy=fy-sy

moveAlongLine.bx=ABS(dx)
moveAlongLine.by=ABS(dy)

IF moveAlongLine.bx>moveAlongLine.by
moveAlongLine.numSteps=moveAlongLine.bx
ELSE
moveAlongLine.numSteps=moveAlongLine.by
ENDIF

moveAlongLine.maxDistance=mDistance
moveAlongLine.ix=dx/moveAlongLine.numSteps
moveAlongLine.iy=dy/moveAlongLine.numSteps
ENDFUNCTION

FUNCTION process%:speed
IF moveAlongLine.numSteps<=0.0
RETURN FALSE
ELSE
INC moveAlongLine.ax,moveAlongLine.ix*speed
INC moveAlongLine.ay,moveAlongLine.iy*speed
DEC moveAlongLine.numSteps,speed

IF moveAlongLine.maxDistance>0.0
DEC moveAlongLine.maxDistance,speed
IF moveAlongLine.maxDistance<=0.0
moveAlongLine.numSteps=0.0
moveAlongLine.maxDistance=0.0
RETURN FALSE
ENDIF
ENDIF
ENDIF

RETURN TRUE
ENDFUNCTION

The angle between two points code needs changing as its inaccurate, but the rest works fine.

The test code :

Code: GLBasic [Select]
GLOBAL moveAlongLine AS tMoveAlongLine

SETSCREEN 1024,768,0
moveTo(0,0,200,100)
DEBUG "Angle : "+angleBetweenPoints(100,100,10,20)+"\n"

WHILE TRUE
DEBUG "X:"+moveAlongLine.ax+"\n"
DEBUG "Y:"+moveAlongLine.ay+"\n"
DEBUG moveAlongLine.numSteps+"\n"
DRAWLINE moveAlongLine.ax,moveAlongLine.ay,1,1,RGB(255,255,255)
SHOWSCREEN
process(0.25)
WEND

If anyone has a better routine for calculating the angle between two coordinates, let me know

#### Kitty Hello

• code monkey
• Prof. Inline
• Posts: 10723
• here on my island the sea says 'hello'
##### Re: Moving between two sets of coordinates
« Reply #1 on: 2009-Jan-22 »
why inline? Why ATAN2? The GLBasic ATAN _is_ atan2.

#### Moru

• Prof. Inline
• Posts: 1781
##### Re: Moving between two sets of coordinates
« Reply #2 on: 2009-Jan-22 »
Mabe this should be in the manual, MrTAToad here isn't the first to ask this. I was too slow to answer him on IRC though.

• Guest
##### Re: Moving between two sets of coordinates
« Reply #3 on: 2009-Jan-22 »
I had thought ATAN2 would compile, but alas, its not found.

#### Schranz0r

• Premium User :)
• Prof. Inline
• Posts: 5028
• O Rly?
##### Re: Moving between two sets of coordinates
« Reply #4 on: 2009-Jan-22 »
ATAN == ATAN2 !

And works fine
I DGArray's

PC:
AMD Ryzen 7 1700 @3.9GHz, 16GB HyperX Fury 3000MHz Ram, ASUS ROG GTX 1060 STRIX 6GB, Windows 10 Pro 64Bit, MSi Tomahawk B350 Mainboard

#### Kitty Hello

• code monkey
• Prof. Inline
• Posts: 10723
• here on my island the sea says 'hello'
##### Re: Moving between two sets of coordinates
« Reply #5 on: 2009-Jan-22 »
See, the atan function just takes one argument, which is: dy/dx. Now, if you have atan2, you can have the atan behaviour: atan2(dy/dx, 1.0), as well as the (much better) atan2(dy,dx) version, which offers you 360 degree angles, whereas atan() dis not deciding on the quadrant:
-dy,dx is the same as dy,-dx.

Anyway.

• Guest
##### Re: Moving between two sets of coordinates
« Reply #6 on: 2009-Jan-22 »
Thats true   Should have relaised that

#### Hemlos

• To boldy go where no pixel has gone before!
• Global Moderator
• Prof. Inline
• Posts: 1635
• Particle Hawk
##### Re: Moving between two sets of coordinates
« Reply #7 on: 2009-Jun-19 »
Old topic yes..
but theres another way i think, much easier for me to understand...

where: a2+b2=c2
distance x from origin to destination=Xdistance
distance y from origin to destination=Ydistance
hypotenuese=SQR(POW(Xdistance,2)+POW(Ydistance,2))
angle of origin x to destination x is CosAngle=ACOS(Xdistance/hypotenuese)
angle of origin y to destination y is SinAngle=ASIN(Ydistance/hypotenuese)

Results:
RELX=x+COS(CosAngle)*movesize
RELY=y+SIN(SinAngle)*movesize

« Last Edit: 2009-Jun-25 by Hemlos »
Volume_of_Earth(km^3) = 4/3*3.14*POW(6371.392896,3)

#### Schranz0r

• Premium User :)
• Prof. Inline
• Posts: 5028
• O Rly?
##### Re: Moving between two sets of coordinates
« Reply #8 on: 2009-Jun-20 »
Hey Hemlos, great work!

did you have ICQ installed?
you can PM your number

I have some great ideas
I DGArray's

PC:
AMD Ryzen 7 1700 @3.9GHz, 16GB HyperX Fury 3000MHz Ram, ASUS ROG GTX 1060 STRIX 6GB, Windows 10 Pro 64Bit, MSi Tomahawk B350 Mainboard

#### Hemlos

• To boldy go where no pixel has gone before!
• Global Moderator
• Prof. Inline
• Posts: 1635
• Particle Hawk
##### Re: Moving between two sets of coordinates
« Reply #9 on: 2009-Jun-20 »
Thanks Schranz0r

For some reason the smtp server is timing out, is it because im in FLorida?
« Last Edit: 2009-Jun-25 by Hemlos »
Volume_of_Earth(km^3) = 4/3*3.14*POW(6371.392896,3)

#### Schranz0r

• Premium User :)
• Prof. Inline
• Posts: 5028
• O Rly?
##### Re: Moving between two sets of coordinates
« Reply #10 on: 2009-Jun-20 »

... is it because im in Florida?

Thats not fair!
I DGArray's

PC:
AMD Ryzen 7 1700 @3.9GHz, 16GB HyperX Fury 3000MHz Ram, ASUS ROG GTX 1060 STRIX 6GB, Windows 10 Pro 64Bit, MSi Tomahawk B350 Mainboard

#### Hemlos

• To boldy go where no pixel has gone before!
• Global Moderator
• Prof. Inline
• Posts: 1635
• Particle Hawk
##### Re: Moving between two sets of coordinates
« Reply #11 on: 2009-Jun-25 »
This topic went from making example of movement math,
to stirring up a particle engine system function set.

ps. check the beta section for the latest screenshot..it is in alpha testing still
Volume_of_Earth(km^3) = 4/3*3.14*POW(6371.392896,3)

#### Schranz0r

• Premium User :)
• Prof. Inline
• Posts: 5028
• O Rly?
##### Re: Moving between two sets of coordinates
« Reply #12 on: 2009-Jun-25 »
little test (my solution):

Code: GLBasic [Select]
DRAWRECT 0,0,10,10, RGB(0xff, 0x00, 0x00)
DRAWLINE 5,5,10,5, RGB(0x00, 0x00, 0x00)

GRABSPRITE 0,0,0,10,10

LOCAL x1=400,y1=100,x2=300,y2=250

WHILE TRUE

LOCAL winkel = ATAN(y1-y2,x1-x2)+180
INC x1,COS(winkel)
INC y1,SIN(winkel)

IF KEY(203) THEN DEC x2,3
IF KEY(205) THEN INC x2,3
IF KEY(200) THEN DEC y2,3
IF KEY(208) THEN INC y2,3

DRAWLINE x1+5,y1+5,x2+5,y2+5, RGB(0xff, 0xff, 0xff)
ROTOSPRITE 0,x1,y1, -winkel
ROTOSPRITE 0,x2,y2, -winkel+180

SHOWSCREEN
WEND
END

« Last Edit: 2009-Jun-25 by Schranz0r »
I DGArray's

PC:
AMD Ryzen 7 1700 @3.9GHz, 16GB HyperX Fury 3000MHz Ram, ASUS ROG GTX 1060 STRIX 6GB, Windows 10 Pro 64Bit, MSi Tomahawk B350 Mainboard

#### Hemlos

• To boldy go where no pixel has gone before!
• Global Moderator
• Prof. Inline
• Posts: 1635
• Particle Hawk
##### Re: Moving between two sets of coordinates
« Reply #13 on: 2009-Jun-25 »
Magic with Math! Beautiful
Volume_of_Earth(km^3) = 4/3*3.14*POW(6371.392896,3)