Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fasasoftware

Pages: [1] 2
1
Thanks a lot!! now it works fine...Best Regards, Lestroso...

Code: GLBasic [Select]
// --------------------------------- //
// Project: VALORI
// Start: Monday, May 09, 2016
// IDE Version: 14.106


// SETCURRENTDIR("Media") // go to media files


GLOBAL data$=NETWEBGET$("webrates.truefx.com","/rates/connect.html?f=html&c=AUD/USD",80,512,5000)




LOCAL splits$[]

  LOCAL  num = SPLITSTR(data$, splits$[], " ") // using space as delimiter

                IF num>0
                FOR i=0 TO num-1
                        PRINT ""+splits$[i]+"", 70, 100+(20*(i+1))
                NEXT
                ELSE
                        PRINT "No Connection", 70, 120
                ENDIF
SHOWSCREEN

MOUSEWAIT



 

2
Nothing works here...:
i have added some code but nothing.....i see nothing... did you try it??

Code: GLBasic [Select]

// --------------------------------- //
// Project: VALORI
// Start: Monday, May 09, 2016
// IDE Version: 14.106


// SETCURRENTDIR("Media") // go to media files


GLOBAL data$=NETWEBGET$("http://webrates.truefx.com/rates/connect.html?f=html&c=AUD/USD",80,512,5000)

 


LOCAL splits$[]

  LOCAL  num = SPLITSTR(data$, splits$[], " ") // using space as delimiter

                IF num>0
                FOR i=0 TO num-1
                        PRINT ""+splits$[i]+"", 70, 100+(20*(i+1))
                NEXT
                ELSE
                        PRINT "No Connection", 70, 120
                ENDIF

MOUSEWAIT


 

3
hI.... I  have tryed your software ...but don't work...can you help me??  please??? i have write this...:

Code: GLBasic [Select]

// --------------------------------- //
// Project: VALORI
// Start: Monday, May 09, 2016
// IDE Version: 14.106


// SETCURRENTDIR("Media") // go to media files


data$=NETWEBGET$("http://webrates.truefx.com","/rates/connect.html?f=html&c=AUD/USD",80,512,5000)


LOCAL splits$[]
 
        num = SPLITSTR(data$, splits$[], " ") // using space as delimiter
               
                IF num>0
                FOR i=0 TO num-1
                        PRINT ""+splits$[i]+"", 70, 100+(20*(i+1))
                NEXT
                ELSE
                        PRINT "No Connection", 70, 120
                ENDIF

        ENDIF

 


_______________________________________
*** Configuration: WIN32 ***
precompiling:
GPC - GLBasic Precompiler V.10.037 SN:9655d67f - 3D, NET
"VALORI.gbas"(25) error : GPC000d ENDIF without IF


If i delete the last endif give this...



_______________________________________
*** Configuration: WIN32 ***
precompiling:
GPC - GLBasic Precompiler V.10.037 SN:9655d67f - 3D, NET
"VALORI.gbas"(10) error : GPC1002 variable is not explicitly defined : data$


Can you help help me?

LESTROSO

4


Dear friends,

Well, i need please an help with fresh code for a project of mine...

I need to retrieve every second the value of some money pairs...but for example is ok for one...

1) first of all i have registered me to true.fx ...

2) this is a demo url without my registration of course but working... :
http://webrates.truefx.com/rates/connect.html?f=html&c=AUD/USD

this give this result: AUD/USD 1462567500019 0.73667 0.73681 0.73373 0.74784 0.74643

I need to retrieve the last value  0.74643

the first value from right, to work and put it into a variable and update every second

So i don't know if i must get my url and retrieve that data?
..any idea?? thanks a lot in advance
Lestroso :(

5
is it possible to compile all Resources(media) and exe in one single file????

Thanks a lot , Lestroso :-[

6
_______________________________________
Dear friend.... i try to compile the arkanoid software for html5 and html5-webgl and for mac...but i receive these errors....
i'm working with free version of gl basic...is it this the problem????
but for linux compile ok.... and also for windows....
for android....compile ok but idon't see the file apk...ok but iwill see better the manual....

The compiler again say to me that don't see the java_home variable envirronment ...but in truth exist!!!!
I'm sorry, but i'm a beginner of gl basic.....can somebody help me???thanks a lot...lestroso :-[




*** Configuration: OS-X_X86 ***
precompiling:
GPC - GLBasic Precompiler V.10.037 SN:9655d67f - 3D, NET
Wordcount:119 commands
compile+link:
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/lib/libGLBasicMac.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/OSX/Lib/libSDL_mixer.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/OSX/Lib/libSDLmain.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/lib/libCxImageMac.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/OSX/Lib/libstdc++-static.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/OSX/Lib/libstdc++.a is out of date; rerun ranlib(1) (can't load from it)
/cygdrive/s/Compiler/platform/Mac/Bin/../libexec/gcc/i686-apple-darwin8/4.0.1/ld: table of contents for archive: /cygdrive/S/Compiler/platform/Mac/OSX/Lib/libgcc.a is out of date; rerun ranlib(1) (can't load from it)
collect2: ld returned 1 exit status
*** FATAL ERROR - Please post this output in the forum
_______________________________________
*** Finished ***
Elapsed: 6.0 sec. Time: 00:12
Build: 0 succeeded.
*** 1 FAILED ***
***************************************************************************


*** Configuration: HTML5-WEBGL ***
precompiling:
GPC - GLBasic Precompiler V.10.037 SN:9655d67f - 3D, NET
Wordcount:119 commands
compile+link:
--WARNING--
Can't locate Java. It's really important.
Please install the Java SDK and set the environment variable:
JAVA_HOME to a value like: 'C:\Program Files (x86)\Java\jdk1.7.x_xx'

WARNING  root: (Emscripten: system change: 1.16.0|asmjs-unknown-emscripten|S:\Compiler\platform\JavaScript\bin\clang|3.3 vs 1.16.0|asmjs-unknown-emscripten|Q:\Compiler\platform\JavaScript\bin\clang|3.3, clearing cache)
INFO     root: (Emscripten: Running sanity checks)
WARNING  root: java does not seem to exist, required for closure compiler. -O2 and above will fail. You need to define JAVA in ~/.emscripten

**************************************************************************
_______________________________________
*** Configuration: HTML5 ***
precompiling:
GPC - GLBasic Precompiler V.10.037 SN:9655d67f - 3D, NET
Wordcount:119 commands
compile+link:
--WARNING--
Can't locate Java. It's really important.
Please install the Java SDK and set the environment variable:
JAVA_HOME to a value like: 'C:\Program Files (x86)\Java\jdk1.7.x_xx'

WARNING  root: (Emscripten: system change: 1.16.0|asmjs-unknown-emscripten|U:\Compiler\platform\JavaScript\bin\clang|3.3 vs 1.16.0|asmjs-unknown-emscripten|T:\Compiler\platform\JavaScript\bin\clang|3.3, clearing cache)
INFO     root: (Emscripten: Running sanity checks)
WARNING  root: java does not seem to exist, required for closure compiler. -O2 and above will fail. You need to define JAVA in ~/.emscripten


7
Announcements / Re: GLBasic V11 public beta
« on: 2013-Oct-05 »
Dear Gernott,  when it will be a stable release of GLBASIC??? I whant purchase your software as soon as possible...now i have downloaded the v11 beta....
ald also when you update your site?? the link of the download it's old...

i thank you a lot very much....

Lestroso

www.fasasoftware.com

8
It possible reduce exe memory and make 1 file exe no external directory??

In other words...the files compiled are too big....and also it can possible integrate all resources file in 1 file .exe compiled and for the other platform?????

best regards

lestroso

9
Hi MrTAToad,

i'm using the latest version downloaded few days ago the 10......i don't remeber exactly


i don't know what is the problem....

can you help me???

best regards,,

Lestroso

10
I'm sorry but nothing works here.....I have tryed the zip  unzip...i have tryed the "chmod +x Macosx" but nothing works... or better  the app start ... but close unexpected...

Here below.. i show you the error that give me my apple mac g4...but i have 10.4.11 system...and a biprocessor upgraded by Maxpower..


Code: GLBasic [Select]
 

I thank you a lot in advance....

Best regards

Lestroso

www.fasasoftware.com

11
Here it is....here the code...from terminal...bho.. i don't understand...
Code: GLBasic [Select]
 
best regards,

Lestroso :'(

www.fasasoftware.com

12
Thanks a lot for your reply...i will try...


best regards.

Lestroso,

www.fasasoftware.com

13
I TRied everything.... i was thinking is my fault because i trying to compile the game 3d in macosx universal...but i'm using the demo glbasic....  and i can compile only for 2d.....ok then i have compiled an simple hello world... but nothing the app (hello world) quit unexpectly...

i don't know what i have to do.....

best regards,

lestroso,

www.fasasoftware.com


14
Thanks Moru....But the files that i found on your link is only i think for windows.....is there too for mac and linux??? I need too much for them...

thanks a lot

Lestroso

www.fasasoftware.com

15
I have tryed to zip on pc and unzip the file but the problem still remain.....The app start and then quit unexpectly

I have also tryed to rar that but is too bad again...

I don't know...

any other ideas??

best regards,

Lestroso

www.fasasoftware.com

Pages: [1] 2